Richards of Hull Screenwash Solvent Recirculation

---

Discharge of solvents into the public sewers is not allowed, and considerable savings can be made with the use of a recirculation unit. The solvent is pumped into the brush for application directly to the screen surface, after which it drains back from the trough back to the tank through a mesh filter, ready to be used again and again.

	Stainless Steel Tank with Pump Capacity 6 gallon (27 litre) with a choice of pump motor Non-Flameproof TEFC - 230v/1 ph - CODE 6953 Flameproof Single Phase - CODE 6951 Flameproof Three phase - CODE 6952
	Stainless Steel Solvent Wash Unit This unit may be connected to a Recirculator Pump or, with the valve closed, solvent in the trough applied by brush, and drained off to a container for safe disposal when exhausted. Three Standard Sizes 50 x 46" (1270 x 1160mm) .... price CODE 6911 67 x 52" (1700 x 1320mm) .... price CODE 6912 86 x 70" (2180 x 1780mm) .... price CODE 6913

Galvanised Washup Units

Ventilation Facilities

Stencil Development

---

Richards of Hull

tel +44 (0) 1482 44 24 22 ..... fax +44 (0) 1482 44 23 62

Unit 1, Acorn Estate, Bontoft Avenue, Hull HU5 4HF, England

Screen Process Index

Contact email to sales@richards.uk.com

Return to the Front Page

Copyright (C) Norman C. Richards, December 2001