Fingerprint Dye Tank Sinks
|
| Richards of
Hull Fingerprint Dye Tank Sinks |
| Built in Stainless Steel, this unit has a large sink area, served by hot & cold Water mixer tap, and a double deep tank; one for the alchohol solution, and a water-flow wash tank. |
| Showing the double tank with stainless steel drip-tray / bund tank
below. As shown in the picture above, this unit has been fitted with a low-level back-extraction ventilation system. Pictures by courtesy of Scientific Support Unit, Devon & Cornwall Constabulary. |
 |
 |
A similar design, built in Polypropylene, which has been provided with
an upper extraction canopy and hanging rails. Pictures by courtesy of Surrey Police. |
 Film Process |
Chemical Mixers |
 Mobile Washup Sinks |