The STUDIO GLOO-BOOTH is specifically designed for use with aerosol adhesives and fixatives or other products with relatively large particulate size.
 | Four sizes of machine are avaialable (A4 to A1 - 12" x 15", 20" x 20", 20" x 28" & 28" x 40"), made from either epoxy polyester powder coated steel or from a lower cost advanced ABS polymer. Both ranges utilise identical filter systems and fan motors. All machines are fitted with replacable hood surrounds made of a tough polypropylene material. An optional ducting kit is available for machines FPA2, FGBA2 and FGBA1. These are recommended to be fitted wherever possible. An automatic pressure pad switch that activates machines by the lifting of the aerosol can is also available as an option for all machines. |
| The SIMair UNI-BOOTH is a multi-purpose spray booth suitable for numerous workshop, studio and industrial situations where fumes and overspray present a problem. If airbrushes are used heavily or in unventilated areas a build up of overspray will occur. To prevent inhalation of fumes Simair offer a range of spraybooths designed to eliminate this problem. Uni-Booth model UB3020, is a multi-purpose machine. It uses a powerful centrifugal blower, drawing overspray into a fine intake filter and charcoal filter. Clean air is then exhausted back into the local environment or outside via the optional ducting kit. A clear acrylic top allows light into the spray area which is supplied with removable liner, hanging bar and turntable. Ideal for three dimensional items and general design. Also suitable for aerosol sprays. |  |
Model UN1510 is a low cost lightweight model ideal for hobbyists and modelmakers. It has a quiet yet powerful fan-motor to draw contaminated air through the intake and charcoal filters. It is supplied with an easy-to-clean translucent polypropylene hood surround. Also suitable for aerosol sprays.
| Model No. | Intake Filter Size | Fan Suction /Air Flow | Fan Motor | Dimensions W H D | Spray Area Dimensions W H D | Weight |
UB3020 | 500x650mm | 485m3/h | 220/240v50Hz | 700x650x650 | 710x580x450mm | 21kg |
UB1510 | 250x375mm | 379 m3/h | 220/240v50Hz | 390x350x350mm | 500X350X250mm | 3Kg |
 | The 'SPRAY-AWAY' quietly and efficiently eliminates the problem of airbrush overspray in your studio. Using our well proven system of suction fans drawing overspray through a series of intake and charcoal filters, The 'SPRAY-AWAY' absorbs all types of colour from, water based inks and dyes to spirit and cellulose based paints. Clear acrylic deflectors coupled with the small dimensions of the machine allow maximum light onto work surface, whilst taking up little actual workspace. |
Both intake and charcoal filters are simple and inexpensive to replace. Machines are supplied with G clamps for attaching the machine to a drawing board. Alternatively it can be fitted semi-permanently onto any worksurface with fixing screws through the mounting plate. The long lead with plug attached allows great flexibility in sighting the machine.
NOW FITTED WITH 3 FANS GIVING 340CFM AIRFLOW
| Model No. | Intake Filter Size | Fan Suction/Air Flow | Fan Motor | Dimensions W H D | Weight |
SSA1001 | 900x200mm | 578m3/h | 220/240v50Hz | 900x350x240mm | 8kg |
SSA1002 | 1250x200mm | 578m3/h | 220/240v50Hz | 1250x350x240mm | 10Kg |