Serigraphic Stencil Development and Screen Washup
|
| Richards of Hull Serigraphic Stencil Development and Screen Washup |
| Polypropylene Stencil Booths With or without back illumination, for Stencil Development or Screen Stripping, on taper style stainless steel legs; listed by actual inner size: 39 x 36" (1000 x -915mm) CODE 6840 .... Illuminated CODE 6841 48 x 48" (1220 x 1220mm) CODE 6844 .... Illuminated CODE 6845 63 x 48" (1600 x 1220mm) CODE 6848 .... Illuminated CODE 6849 79 x 59" (2000 x 1500mm) CODE 6852 .... Illuminated CODE 6853 96 x 72" (2440 x 1830mm) CODE 6856 .... Illuminated CODE 6857 118" x 79" (3000 x 2000mm) CODE 6860 .... Illuminated CODE 6861 157" x 96" (4000 x 2440mm) CODE 6864 .... Illuminated CODE 6865 197 x 118" (5000 x 3000mm) CODE 6868 .... Illuminated CODE 6869 |
| Galvanised Screen Washup Unit Resistant to all screenwash solvents and designed with a pronounced slope to waste to facilitate use with a Screenwash Recirculator, this is the most cost-effective screen-management work station. Also available in Stainless Steel Please refer to the attached page for full info on Galvanised & Stainless Steel Washup Units |
| Stencil Strip Waste Treatment A filtration unit made in Polypropylene, designed to reduce chemical oxygen demand, neutralising and homogenising acidic waste from stencil development and stripping operations. This filtration system is not designed to deal with the discharge of solvents Wash Water Recirculation We also produce a range of Sedimention Tanks to screen the water used in stencil development to be recycled for screen recovery. Also available in Stainless Steel |