Etch Tanks

Richards of Hull

Etch Tanks

Tank systems manufactured in solid chemical resistant plastic, Polypropylene or PVC, with stainless steel support frames.

Etch Bench This unit has tanks for etching 3 different metals - copper, brass and nickel silver - plus a tank for a stripping-off solution

The integral splashback has a void behind for concealed connexions to the water supply taps.

Etch Tank Closeup Raised upstands around the tanks and captive hinged lids help to prevent cross-contamination, and facilitate washing down the top surface into the integral wash sink.

Laminar Flow
Fume Extraction Acid Bath Wet Bench

The large sink area for working in open trays has slide-back clear screens to contain the fumes which are drawn away towards the back.

Richards of Hull

tel +44 (0) 1482 44 24 22 .......fax +44 (0) 1482 44 23 62

Contact by email to sales@richards.uk.com
Go back to Platemaking Sink page
Return to the front page

	This unit has tanks for etching 3 different metals - copper, brass and nickel silver - plus a tank for a stripping-off solution The integral splashback has a void behind for concealed connexions to the water supply taps.
	Raised upstands around the tanks and captive hinged lids help to prevent cross-contamination, and facilitate washing down the top surface into the integral wash sink.
	Laminar Flow Fume Extraction Acid Bath Wet Bench The large sink area for working in open trays has slide-back clear screens to contain the fumes which are drawn away towards the back.