Fingerprint Dye Tank Sinks
| | Richards of Hull Fingerprint Dye Tank Sinks |
 | Built in Stainless Steel, this unit has a large sink area, served by hot & cold Water mixer tap, and a double deep tank; one for the alchohol solution, and a water-flow wash tank. |
 | Showing the double tank with stainless steel drip-tray / bund tank below. As shown in the picture above, this unit has been fitted with a low-level back-extraction ventilation system. Pictures by courtesy of Scientific Support Unit, Devon & Cornwall Constabulary. |
 |  | A similar design, built in Polypropylene, which has been provided with an upper extraction canopy and hanging rails. Pictures by courtesy of Surrey Police. |
 Fume Cupboards |
 Chemical Mixers |
 Washup Sinks |