Laminar Flow Fume Extraction
|
| Richards of Hull Laminar Flow Fume Extraction |
 |
 |
Single or double compartments, each of which is provided with two drain-off valves, one which may be used for chemical recovery, the other connected to the waste system. |
 |
A low-profile deep sink design suitable for working with open dishes but also may be used with the etch chemical within the sink, using the additional drain valve to decant back to a container. Extraction at high velocity through the slots at the back, into a plenum chamber which enables a duct connection either from the top or from below, creates air movement over the open trays of etchant, away from the worker. A cold water tap, with 1/2" hose adaptor, is provided in each compartment |
 |
 |
Single or Double Compartment Units (with a guide to air volume required) Single 3ft x 3ft (300cfm or 480m³/h) ................... price CODE 6412 Single 4ft x 3ft (400cfm or 650m³/h) ................... price CODE 6416 Single 6ft x 4ft (600cfm or 1000m³/h) ................... price CODE 6418 Double 3ft x 3ft (600cfm or 1000m³/h ................... price CODE 6422 Double 4ft x 4ft (800cfm or 1400m³/h ................... price CODE 6426 (right-click on these sketches to view & print larger) |
 |
The price of the units (as Coded above) includes provision for a fan. Duct systems must be designed to suit the location of each installation and the fan specification may need to be uprated. We can quote for installation of the duct system or supply the the units without the fan for others to install. |